turbo Grant

Will be cuming down you once it's dried up, get that exhaust made up bet you havnt got some paint on the inter cooler brackets I welded on haha

Was out working on the car last night making up the last couple of fuel lines. Just need to bolt the pump down with the rubber bobbins I got today. Bot the tank in finally and the fuel system is finished apart from tank breather

It's a HTA GT35 and that's shorty in the pic, he gets excited over it haha Really nice base to start from. Takes time to get them how you want. Just leave room at the end of the list for the emb or other form of management. Will be much better to drive on

I'd rather go down the emb route and a ct9 hybrid. Will make a nice responsive car. It's nice when you get them near enough standard. Mine only came with sard r2d2 bov, jap exhaust, rsr panhard rod, tein coilys handlers so well and a hks turbo timer all done over in jap land apart from the bov

Looking good, you going to need a restrictor banjo bolt for the turbo as its ball bearing if you havnt already got one. I've got a smaller banjo fitting. Let me know if the one you have is too bug and ill send it up

Osram bulbs are good. H.I.D lights are fine on our cars as long as they are both the same colour and have a pattern. On 2008 cars on need head light washers or self levelling son we don't need to worry about that

Put the tank in last night to see how much my fuel lines will be in the way. I was happy with where they were since I just quested where to drill the holes in the floor. Just want to roll the edge of the tank and put some clips where the pipe goes up on the vertical. Will be taking the tank out again tonight take the hammer to it lick of paint then it can be bolted in couple more fuel pipes to make up bolt the bosch 044 down and the fuel system will be finished

If you could get picture of numbers and plug ill see if they match up with mine

As above, need a paseo st ecu cheaper the better as I'm going to chop it up

Been cracking on with a few more things. Got my tank inspection plate welded with fittings for my fuel lines. For new plugs on the injectors

Shortys always misses things haha

i span it on a round about on the way home from work, not bad sice i go over 8 round abouts haha love driving in the snow!

The hand brake did come up a few times haha

Get that abs out man

I live the snow and so does the paseo

Test fitted the RC 1000cc injectors last night after I spent ages looking for them and they turned out to be still in the paseo from when I picked them up from jayep91. Just need to trim the rail posts down a bit so they are a tighter fit

Need to make some brackets for the fuel line up round the tank. Get the tank back in. Make up the lines coming out the tank. Finish off fabricating the exhaust up. Tidy up under the inlet manifold bolt that on. Calibrate sensors and check timing add fuel and fire it up. It's my mission to get to jap fest in a starlet this year!

It's my job to spot things on cars haha would be interesting to see if the front end will look any thing like pp's rotary starlet

I already want to change my intercooler set up lol. I see the fuel filter and reg has moved for some tasty inlet mods

Told you it will never be left haha

As long as its more than 180 at the wheels you little ball of fun

Taggys said he looks forward to SEE how it goes. Not help haha

This car is unique, great how its coming along

Havnt a clue power wise. 300+ sounds good. But won't be crazy crazy till I get my new head on end of the year