Jump to content

maddox710

Member
 View Profile  See their activity

  • Content Count

    3723

  • Joined

  • Last visited

 Content Type 

Everything posted by maddox710

  1. maddox710
    Think most of the trouble with ct9 is all in the exhaust housing
  2. maddox710
    Guarantee 99% of glanza owners will never come anywhere near the lifting point of arp head bolts
  3. maddox710
    Whats wrong with arp head bolts?
  4. maddox710
    They are obviously not made for the 4e hence why a machine shop has to modify the block and head
  5. maddox710
    Pretty sure the block needs drilling out where the old head bolts go and tapping for the wide stud
  6. maddox710
    Looking fuckin sweet
  7. maddox710
    Looking good mate. When it comes to porting 4e head I'd just concentrate on the exhaust side, the back of the valves was soo tight I couldn't even fit my thumb in before I done my old head. After I had room and smoothed out the path down the exhaust runner so it didn't make a sharp turn once it was past the exhaust valve
  8. maddox710
    Cheers Dan been giving the flat head screwdriver ago but it's being stubborn. Last time I done thisnthe gearbox was out on the floor and was a doddle
  9. maddox710
    Hi guy' sstruggling to get the seals out. Whats the best method?? Cheers Will
  10. maddox710
    Maybe you have your wastegate plumped in wrong and it' creeping about fuel cut
  11. maddox710
    You running a fcd?
  12. maddox710
    Jesus I remember this from tgtt aswell Welcome back
  13. maddox710
    You could inspect the rod bearings etc yourself,the sump is just held on by loads of 10mm bolts. But I'd suggest go get it rebuilt if your not very savvy with engine building and tools. From how you desribe ii ssounds like bottom is toast, so don't drive it.
  14. maddox710
    Mk3 should colin
  15. maddox710
    If you have lsd box they will be different again. But non Lsd should be the same
  16. maddox710
    Whats the problem? Keep chipping away nick nothing wrong here just usual glanza ownership
  17. maddox710
    Hi Jamie, welcome along.
  18. maddox710
    "yellowsport coilovers". facepalm. He reviewed my old white glanza after I sold it, he said the new owner had built it from the ground up...
  19. maddox710
    Absolutely epic love seeing the Japanese ingenuity shame I can't read anything in jap
  20. maddox710
    Watched the review this morning sounds epic I absolutely love the thought of itb 4age in a staret frame. Shame your selling though. I gotta say that Jamie fyd is the biggest plank ever. Doesn't have a clue what he' ssaying sometimes
  21. maddox710
    No there isn't purely because of the glanza have a specific design due to having wheel bearing in the disc
  22. maddox710
    Basically to make it worth your time need a computer with a graphics card equivalent to a nvidia gtx 1070ti(£360+) or above with a efficient power supply. Obviously a big powerful gpu consumes alot of power so you need to Make sure your not paying out more in your electricity bill than your actually making in crypto currency
  23. maddox710
    Lovely motor buddy, the n57 is such a beast of an engine specially with a 8spd zf attached
  24. maddox710
    Why had the sterling got value?
  25. maddox710

    Rx7 tmic

    maddox710 replied to maddox710's topic in Wanted

    Bump
×
×
  • Create New...