I use ArmorAll shield, for about £10 you get the foam applicator and microfibre cloth. Its very easy to put on, you can wipe off straight after putting on. Long lasting as well. The best one i have used in terms of value for money and longevity
Well the prices he has on the listing seem reasonable and if you have agreed it all for £500 he must be getting no interest or very little as its collection only.. Go for it, but take some who knows about these parts with you if possible
graphics look good as expected, but im not liking how the camera drops when drifting, hope camera view is adjustable wonder what cars they will have, the mods look real nice.
Sounds more like a ball joint then. The shocks will make a noise when rocking the car. Spray some wd40 over the anti roll bar bushes, then drive it. If its still there the do the same to the ball joint and drive again. Rule them out one by one.
Rock the car and try if you hear where the noise is coming from, could be anti-roll bar bushes, ball joints Then spray it will some wd40 or somthing and see if the noise goes away. Hopefully you will find whats making the noise
you not got a tracking number off him? as hard as it is you will have to be a bit patient, not been a week yet and weekends are not counted as working days. it is holiday season so someone else might know something we dont
Just to let you know that the screws that hold the airbag are star shape screws After loosening the screws you might have to pull on the airbag and undo the screws to get airbag off
Gas shocks are better at absorbing small bumps but overall a little stiffer at higher speeds. Kyb excel-g would be a good replacement as they are gas equivalent of standard
Start by checking the bulb has not gone in the dials console. Then check OIL pressure sensor wiring. Normally light stays on when its messed up but you never know
I used a website for courier services called interparcel. Most of the time i use UPS through it. So far UPS have never let me down and its always a signed delivery and they email you the signature.
I used 50ft of wrap on my ramhorn style manifold. Thats 1 inch wrap for a neater finish. Dei titanuim looks nice If your doing a straighter pipe then used 2 inch wrap
Puks are like the spokes of the clutch plate. The more puks the easier clutch engagment is. So a 6 puk, stage 4 competition, sprung clutch would be the i would get