5T4R7ET N/A

If ring land was gone the oil would also come up through the rocker cover breather. The one on the left side.

download firefox browser and install it. link herehttps://mozilla.org.uk/ try that see how it goes

sounds like GT6 is what GT5 should have been like . suprised they didnt wait to release a ps4 GT also herd that you have to pay for cars now. the specials editions i guess???

cold starts on starlets really bring down the mpg. if your doing a lot of short trips expect mpg to be around the 25-30mpg mark. it takes a while for everything for warm up and fuelling to start to get to normal most with mixed driving will around get 33-38mpg

a stiff suspensions will eat through wheel bearings faster.

check your earth points as well

gotta agree with morgey on this one. 50 profile is the one i would go fo better in terms of ride, handling and price. look are the only thing thats debatable

i think starlet have same clutch as some mr2's iirc. someone on here must know, might make it cheaper. starlet have premium prices for some reason.

very nice levin, hard to find example like this one. is that a carbon bonnet I see

have you tried blocking the wax stat that is under the throttle body? there is a hole inside the throttle body at the bottom. start the car and block it with your finger and see if makes any difference. there is also another hole on right which goes to the idle control screw on the right. block that at the same time as see if it makes any difference. make sure idle screw in screwed all the way in. can you put a picture of the throttle body up at the moment want to see whats going on with the little vacuum ports

could be turbo knackered if you bought a second hand one. or the AVCR playing up or not setup right

picked up one of these from a local parts store. £5 cant go wrong. you will have to take the splash guard off and unscrew from underneath. http://www.ebay.co.uk/itm/215mm-Oil-Filter-Chain-Wrench-Remover-8-5-Fuel-Strap-Removal-Tool-/251274561422?pt=UK_Hand_Tools_Equipment&hash=item3a8121878e

^^ really??, with a few mods, like brakes n stuff they are pretty good

by the way i have a mocal sandwich plate with a 85 degrees thermostat, pm me if your interested

i would get a temp gauge first to see if you even need one. most cases you wont unless running high boost.

do you have an oil temp gauge? i would go for 85 degrees if your going to put one on

Was that the water temp sensor causing all that headache? Well done good progress

For the meantime don't use the handbrake and leave it in gear instead when you park. 1st or reverse. The chances are that that you need new cables. But also check for leaking cylinders, brake fluid ok?

Most formula 1 auto centre have new geometry equipment. It's pretty good as you can check everything you want

did you manage to hook up the water temperature sensor? if not it will most likely be that

ignorance when people talk about something thinking they understand it fully, when they obviously have no idea and base there opinion or argument on pure IGNORNACE

impressive stuff!!

at the moment it looks like its only running off the actuator because the manual boost controller and the greddy control valve are not connected properly from what i can see. take the manual boost controller out and connect to the greddy control valve

Evo 7 recaro look great and are practical for someone your height. Plus you always see some on sale on eBay or the forum. Will reqiure customising unless already done .

had a go with a standard s3 , i was running 0.5 bar on a td04,no map. quite evenly matched, he was a bit quicker but not by much.