Jump to content

richardc9052

Member
 View Profile  See their activity

  • Content Count

    1371

  • Joined

  • Last visited

Everything posted by richardc9052

  1. richardc9052
    I have rail and mani
  2. richardc9052
    Savage pull for .5 bar
  3. richardc9052
    I have all that stuff. In Ireland so you need to use a courier but would be cheap enough in one box. Pm me an offer
  4. richardc9052
    posted a bout 15 mins ago
  5. richardc9052

    Levin twimpots

    richardc9052 replied to Turk's topic in Braking

    Levin twin pots, corolla single pot carriers, 1.8vvti mr2/mrs disks.. No spacers and no machining of disks. Just a slight filing of the actual caliper which is needed for any of the other combinations as well ;)
  6. richardc9052
    Doesn't matter if you buy one with a pulley Otherwise you need the one that matches your pulley..
  7. richardc9052
    buy one with a pulley incase they send you the wrong one There are two types. one with a pressed on pulley and one with a bolt on pulley
  8. richardc9052
    +!
  9. richardc9052
    The ones on eBay are the real deal. Buy one from a UK seller..
  10. richardc9052
    Man that's sweet!!!!!
  11. richardc9052
    Mr2 seats are the most comfortable oem seats you can get ;) they are worth getting the rails modded
  12. richardc9052
    What kind of parts? corolla, cynos, paseo, yaris, sera
  13. richardc9052
    Because of the higher compression a little boost goes a long way..
  14. richardc9052
    I learnt to drive in a 1.5 diesel starlet ;)
  15. richardc9052
    They are all different.. Td04 then you have different letters relating to differences in exhaust housing and then numbers that relate to compressor wheel and then a final letter to do with compressor housing. I might have that all wrong but that's the general idea. Basically you could be fitting a smaller turbo with a bigger exhaust side that's going to cause more lag with less power, the opposite or any of the above combinations..
  16. richardc9052
    They have a flash memory.. Ever had a usb randomly "forget stuff" lol I think not
  17. richardc9052
    ive done the top and doing the bottom ;)
  18. richardc9052
    Look into the AEM FIC as a piggback as well, very good setup.
  19. richardc9052
    A new original will probably more expensive than a new lightened one... I know what I'd choose
  20. richardc9052
    If your going to buy a new flywheel you might as well buy a lightened one. If your talking about using a second hand one if it hasn't been skimmed then your still in the same boat
  21. richardc9052
    You say your sure it slipped? If it slipped you would definitely know!
  22. richardc9052
    eBay bud
  23. richardc9052
    Should be almost on the floor without the helper spring
  24. richardc9052

    head caps

    richardc9052 replied to leemillin's topic in Engines

    Are they numbered with sizes like the bottom end caps?
  25. richardc9052
    But if you think about it your going to get to a point where everything is new and you wont have to worry about anything going wrong for another 50-60k miles
×
×
  • Create New...