richardc9052

im confused with the lightening bolts?

I'd run a 3 puck anyway if you even think about launching it but if you just tip about with some foot to floor action on B roads etc then an organic upgrade is fine

It all fits.. Just make sure if your using your inlet mani that the head isn't the one with the water Chanel and the inlet doesn't have the extra material to block it. Try to get the inlet mani with it basically just to be sure It all fits.. Just make sure if your using your inlet mani that the head isn't the one with the water Chanel and the inlet doesn't have the extra material to block it. Try to get the inlet mani with it basically just to be sure

How long after you starting the engine from cold does it start bubbling?

Bump I'll do this £40 posted anywhere in the world

Got one here still on an engine but I can remove it. £70 + prob 15-20 to courier it to you

Put 12v to the fan. But to be honest if the coolant is bubbling over that's generally a sign there are combustion gasses entering the coolant somehow

Google how to use a timing light. When you put the car in diagnostic mode yes you do start the car otherwise you couldn't time it..

Any calipers of an e10/e11 corolla with normal single pot brakes

fuck sake.. is the holefor that open ended? if it is hes gonna have to take the head off to clean out any swarf after he drills it out for you.

The solution i gave above doesnt require any machining of the disk. It only requires the slight filing of the caliper which you have to don on them all.

agreed!

Your putting too much pressure and not using enough cutting fluid..

Or if you use the discs off a 1.8vvti mr2/mrs with corolla single pot carriers it all bolts straight on. No machining, no spacers, no extended studs ;) Courtesy of BiMotoMan ;)

Apologies I just asked him and it's a z1 he has... I'll get my coat

It just bolt turbo bits and get an emanage mapped on it no changing loom then.. Think there's a trader on here doing emanage blue fitted and mapped for 5/600 then just get 4efte sump, pickup, thermostat housing (if you want to use water lines) and a 4efte oil filter relocation plate and som intercooler and piping. Oh and 4efte injectors

Not much when you running 3 bar hahaha

You should still come over I'm sure you will find another gt that you like for the price

Seriously no boobies????? Honestly though.. seriously bad form!!! Did any money change hands?

You can do a direct connection

5E?

Am i seing things or is there a huge ass snail in place of the battery?

What happened to all the posts/pics??

Don't you just love when they don't read high enough I had to change mine once because it wouldn't read over 2 bar.. Sucked but was awesome! Sorry for the spam ;)

If you get a price on a new bonnet will you post it up? im also interested in getting one in the future