Jump to content

BMX-RIG

Club Member
  • Content Count

    613
  • Joined

  • Last visited

Everything posted by BMX-RIG

  1. 195/50/15 tyres would work great on them, and yes 4x100 6j will fit great with no rubbing issues😎
  2. have you checked the gearbox mount in the tunnel?
  3. Look good! A good base to start with is always a good start! its been done time and time again but heres my daily n/a glanza rep 😎
  4. Looks amazing, rare colour too to top it off!
  5. Also using castrol magnatec 10w40 in mine, fairly standard setup.
  6. You could, but it depends how 47613B is sat inside of 47621A as it has a recess where the pin sits in. As the mechanism rotates that is what operates the handbrake, ill try get some photos on monday when im back at work👍🏻
  7. Great buy! Any plans? With regards to the mirrors, can you hear the motor trying to unfold them?
  8. Yes very!😂 i found with one set that the cage with the spring arrangement was actually damaged and simply wouldnt hold in! Ended up using one from another caliper and the circlip when straight in afterwards lol. as for the above im not sure why it wouldn't come out as theirs nothing keeping it in.
  9. As said above, unless the part with the part number 47407A is still on with the circlip in place.
  10. Fitting a fuel tank guard, from memory you need 4 pairs of arms 🤣 i had it on the ramp and had someone support the tank while some of the bolts were out 👍🏻
  11. I have one here 👍🏻
  12. Dam possibly the only one i didnt see! Saw two white, one silver and my own.
  13. I also only counted 4 lol. Which one was yours? Did chat with a lad called Ashley with a silver one who was a sound guy.
  14. Good to see it getting some use 😎
  15. Bias opinion, but obviously leave it red lol.
  16. Went last year and really enjoyed it! Besides the amount of rain! Should be attending this year also. 👍🏻
  17. A fairly early one too, love the retro wing mirrors. Ticks most boxes otherwise expect the 3dr one ☹️
  18. Cheers dude! Never know how much detail some people are really interested in lol. Off to the isle of wight in it this weekend!
  19. I thought they were too from memory! However they sit slightly in, when i put my 98 bumper on my reflet there was about half an inch gap between the bumper and the bracket. I just used a small tube like washer to make up the difference.
  20. If your desperate theres an rx7 one on ebay but its arc money. ☹️ https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F223562330926
×
×
  • Create New...