Jump to content

5e colin

Club Member
 View Profile  See their activity

  • Content Count

    6604

  • Joined

  • Last visited

 Content Type 

Everything posted by 5e colin

  1. 5e colin
    fit a vac line from turbo niple to top actuator feed and vent bottom 1 to air
  2. 5e colin
    have you a mechanics oil pressure gauge to test your pomp ??
  3. 5e colin
    my god thats a funny looking micra
  4. 5e colin
    get grit 60 sandpaper out and touch up with our trusted rattle can who cares about these prettyboys mamas cars
  5. 5e colin
    if the driveshafts inner cups from starlet fit then your onto a winner
  6. 5e colin
    looks like its cracked near the o2 sensor to the right of it between the bottom and top bolt holes on the weld ??
  7. 5e colin
    the thooth are fucked on the handle locking mechanisme to recline same happend to my 1 not so long ago you will have to swap the gt rail over to new 1 or new seat
  8. 5e colin
    also be aware there is diferent spline sizes to where they slot in the hub !!!!
  9. 5e colin
    if al fails or it cost to much for you over there to fix the current engine / you could source a 4efe ( for now ) and bolt the turbo stuff to that to get her on the road again over here the 4efe ( NA ) engines cost 100/150euros for a good 1 so cheap option to get back on the road
  10. 5e colin
    only half a turbo the exhaust housing and center core welded up where the turbo shaft was so no exhaust gasses can escape and you just bolt the original cat or decat to that i use this as a emissions cheater
  11. 5e colin
    porkys being pigs there above the law
  12. 5e colin
    pm coming
  13. 5e colin
    it works i have this from my car when it was ct9 its adjustable with the screw uptop havent used ifor aaages will check the nipple size 2moro think its 4 mm or 6mm same size hose as you get going to the actuator
  14. 5e colin
    have this ere if its any good
  15. 5e colin
    BIG money gon in to that car back when it was build
  16. 5e colin
    few nice collectables there
  17. 5e colin
    ^^^^ sure some anal girls will love that
  18. 5e colin
    wanted glanza v oem seat rails as the gtt rails are non compatible to the gen 7 seats :( is there a difernce in the rails between the na p9 and turbo v ?? if there the same i might get sorted in the scrappy ??
  19. 5e colin

    Piston Ring File

    5e colin replied to Ollieh17's topic in Wanted

    http://www.ebay.com/itm/910-89408-Precision-Piston-Ring-Filer-Carbide-Cutting-Wheel-/400314314317
  20. 5e colin

    Piston Ring File

    5e colin replied to Ollieh17's topic in Wanted

    buy 1s for life mate or a metal file and a steady hand doos the job to make a timber mall !!!
  21. 5e colin
    you can gut a fucked ct9 weld up the center hole ( only exhaust housing left ) with a stock mani and cat
  22. 5e colin
    probably ringlands or chipped valve use the money to buy another 1 and invest it in this 1 so you can rebuild it piston can be replaced with the engine in the car so not to big of a job if your in the know how either way head has to come of if your lucky you might see a chipped valve instead
  23. 5e colin
    ya its not simple needs adaptor plate between box and engine etc etc
  24. 5e colin
    socks done a mr2 turbo box on his 2zzge in the starlet with custom shafts pm him its not a simple job
  25. 5e colin
    custom job there is no manifold thats a strait fit as the connection flanges are in diferent spots/shape
×
×
  • Create New...