Jump to content

turbo Grant

Member
  • Posts

    2479
  • Joined

  • Last visited

Everything posted by turbo Grant

  1. Nothing like getting the party started early I'm buzzing! I don't work a full week for the next 3 weeks!
  2. Bell end! Not as if I've been reminding you all year!
  3. New ktm's sxf's don't have a kick start tho lol
  4. Car looked good out on track, good to put a face to the name after many years
  5. I had a bit of fun. Overtook the 3 cars infront of me and that was it lol I was at the front for the rest of the session. Couldn't push it as hard as I wanted. My arches were scraping on my tyres a bit. And without the oil cooler fitted I got the oil temp up to 138 deg haha
  6. Just give it a good pressure bleed. Release the bleed nipples when someone is inside pushing the pedal down. Then lock it back up before they relise the pedal. Works a treat that way.
  7. And just to add. Stalet 82/91 non LSD polly mounts fit in the ep70 mounts
  8. Yeah it's just a smaller size shank. Will work fine for adding a bit more camber.
  9. Just put 1 ep70 hub bolt in each side
  10. 3" as a minimum.
  11. This has also been on my mind! Good luck with it
  12. As about. Local to hampshire ideally What you guys got
  13. Just give it a vac leak on the manifold. That will bring the co down a bit. Not the right way to do it but it does work lol
  14. Just get new wiper blades with washer jets on them. Saves drilling holes in the cf bonnet
  15. My ats diff is awsome. Very hard to find diff tho. I need to swap my box over and give my cusco diff a thrashing. See how it compares
  16. It will be the contact rivets on the tracks inside the light.
  17. Is the car using any water?
  18. You will need insurance on it to tax the car as well
  19. Could be a couple if things. Was the flywheel rubbed down with emery cloth or skimmed befor fitting new clutch? A the other is if the gearbox didn't go in very well and bent the friction plate a tad. Chances are it's will be down to the first thing. I suspect it will bed in and go away over time.
  20. Are you sure you have the right bushes. There are 2 types and a few 3mm between them
  21. Just paid up for me
  22. Just don't go as mad as Amjad did :/
  23. It will just be the same as a stock one. Use the throttle stop to set it up. Night be a little out as throttle stop will be in a different place but will be close enough
×
×
  • Create New...