Jump to content

turbo Grant

Member
  • Content Count

    2479
  • Joined

  • Last visited

Everything posted by turbo Grant

  1. I have mine unplugged, needs to block the bugger off. The throttle body take care of the idle fine
  2. Some one has clicked the car before.....
  3. Ummm, been looking at buying another set of coilovers.....
  4. I might be wrong but isn't that the oem aero lip?
  5. For the sake of £15 odd would be simpler to put a new one on
  6. Think it's time you got behind the wheel of a GT
  7. The blitz k24 is basically the k26. Mic drive a starlet with one. Was a nice turbo. Fast spooling and so on
  8. The bottom one is just a cat temp sensor. Won't affect the car if it's in or out
  9. It's coming along Amjad yeah just drop me a text it's better for me. You going to be at fest this year?
  10. More polly bushes Not sure if they are going to fit yet. Will give it a go at the weekend and stick my anti lift kit on as well
  11. Nice result at least he was helpful about the fuel pump and have you and option. I really should get mine white one on the dyno
  12. Very nice seats. Do they have the squeezey sides like when you press the sport button on the rs4?
  13. Your going to have to drill a 4efte fly wheel to suit the 5e crank then.
  14. Use a 4efte gear box bolts straight onto 5e. As above the 5e flywheel bolt pattern is different to the 4e
  15. Have you got an alloy catch can that's full of water?
  16. It would end in some one at the bottom of the lake.....
  17. Fitted polly engine mounts on the car now. The old 1E mounts were not that great and I was getting lots of engine movement. The mounts I got are non LSD starlet turbo mounts. The bushes all fitted spot on in the 1E mounts
  18. That's a quality find for the sr
  19. Looking good. Will be good to thrash round the track I fitted a braided cluch line on the 70. It does make a difference
  20. GT ecu is the best to retro fit as it has 2 plugs. If you get a auto loom say you just rip out all the wiring to do with the engine a mate it to your old loom.
  21. You could just wire in an engine loom intro your existing loom. That's what I done on my ep70 conversion
×
×
  • Create New...